Rough Terrain/Industrial Telescopic Handler
Rough Terrain/Industrial Telescopic Handler – Novice Operator
Rough Terrain/Industrial Telescopic Handler – Novice Operator is for operators with little or no previous experience using a rough terrain telescopic handler truck. The course will give you the skills to operate the truck safely and efficiently. And who wish to achieve a nationally recognised operator qualification in the safe and correct use of rough terrain telescopic handler.
- Course Duration: 3 – 5 days (09:00am to 5:00pm each day)
- Maximum Instructor/Candidate Ratio: 1:3
- RTITB Certification: This then enables the candidate to operate Rough Terrain Telescopic Handler (with authorisation) both the photo ID card and certificate are valid throughout the UK and will be recognised by both employment agencies and perspective employers. The candidate’s name and details are kept on a National Operators Registration Scheme database (NORS) for 3 years.
- WSM IN-HOUSE Certification: This is optional, and if employers prefer, we can supply In-House certificates, only allowing the candidates to operate lift trucks / machinery within the company.
Course Content
Successful candidates will gain suitable and sufficient understanding of current relevant legislation, best practice, learn skills and ability in the safe use of Rough Terrain/Industrial Telescopic Handler in line with current approved methods and manufacturer’s instructions.
The course agenda includes:
- Course introduction and induction
- Current relevant regulations
- Operators Safety Code
- Introduction to machine
- Pre-use inspections
- Controls and instruments
- Components and main types of lift trucks
- Re-fuelling systems
- Coolant, fuel and lubrication systems
- Emergency controls
- Manoeuvring over uneven ground
- Operators safety code
- Handling loaded / unloaded pallets and difficult shaped loads
- Loading and Unloading flat bed lorries and at various heights
- Associated Knowledge, Pre-use Inspection and Practical examinations
To reserve a place on one of our courses for Rough Terrain Telescopic Handler – Novice call or email our office on:
Office: 01387 733731
Email: info@wsmtraining.com
Rough Terrain/Industrial Telescopic Handler – Experienced Operator
Rough Terrain/Industrial Telescopic Handler – Experienced Operator will have some previous experience (possibly self taught) and will be familiar with the steering and operating characteristics of a rough terrain telescopic handler truck but will not have had the benefit of adequate, formal training in basic operating skills. However, they wish to gain a formal, nationally recognised qualification in the safe use of Rough Terrain/Industrial Telescopic Handler truck.
- Course Duration: Up to 3 days (09:00am to 05:00pm each day)
- Maximum Instructor/Candidate Ratio: 1:3
- RTITB Certification: This then enables the candidate to operate Rough Terrain Telescopic Handler (with authorisation) both the photo ID card and certificate are valid throughout the UK and will be recognised by both employment agencies and perspective employers. The candidate’s name and details are kept on a National Operators Registration Scheme database (NORS) for 3 years.
- WSM IN-HOUSE Certification: This is optional, and if employers prefer, we can supply In-House certificates, only allowing the candidates to operate lift trucks / machinery within the company.
Course Content
Successful candidates will gain suitable and sufficient understanding of current relevant legislation, best practice, learn skills and ability in the safe use of Rough Terrain/Industrial Telescopic Handler in line with current approved methods and manufacturer’s instructions.
The course agenda includes:
- Course introduction and induction
- Current relevant regulations
- Operators Safety Code
- Introduction to machine
- Pre-use inspections
- Controls and instruments
- Components and main types of lift trucks
- Re-fuelling systems
- Coolant, fuel and lubrication systems
- Emergency controls
- Manoeuvring over uneven ground
- Operators safety code
- Handling loaded / unloaded pallets and difficult shaped loads
- Loading and Unloading flat bed lorries and at various heights
- Associated Knowledge, Pre-use Inspection and Practical examinations
To reserve a place on one of our courses for Rough Terrain/Industrial Telescopic Handler – Experienced call or email our office on:
Office: 01387 733731
Email: info@wsmtraining.com
Rough Terrain/Industrial Telescopic Handler – Refresher Operator
Rough Terrain/Industrial Telescopic Handler – Refresher Operator for personnel who are currently formally trained and have RTITB certification or equivalent to operate Rough Terrain Telescopic Handler trucks and who wish to refresh and reaffirm their driving skills.
- Course Duration: 1 day (09:00am to 5:00pm)
- Maximum Instructor/Candidate Ratio: 1:3
- RTITB Certification: This then enables the candidate to operate Rough Terrain Telescopic Handler (with authorisation) both the photo ID card and certificate are valid throughout the UK and will be recognised by both employment agencies and perspective employers. The candidate’s name and details are kept on a National Operators Registration Scheme database (NORS) for 3 years.
- WSM IN-HOUSE Certification: This is optional, and if employers prefer, we can supply In-House certificates, only allowing the candidates to operate lift trucks / machinery within the company.
Course Content
Successful candidates will gain suitable and sufficient understanding of current relevant legislation, best practice, learn skills and ability in the safe use of Rough Terrain Telescopic Handler in line with current approved methods and manufacturer’s instructions.
The course agenda includes:
- Course introduction and induction
- Current relevant regulations
- Operators Safety Code
- Introduction to machine
- Pre-use inspections
- Controls and instruments
- Components and main types of lift trucks
- Re-fuelling systems
- Coolant, fuel and lubrication systems
- Emergency controls
- Manoeuvring over uneven ground
- Operators safety code
- Handling loaded / unloaded pallets and difficult shaped loads
- Loading and Unloading flat bed lorries and at various heights
- Associated Knowledge, Pre-use Inspection and Practical examinations
To reserve a place on one of our courses for Rough Terrain/Industrial Telescopic Handler – Refresher call or email our office on:
Office: 01387 733731
Email: info@wsmtraining.com
Rough Terrain/Industrial Telescopic Handler – Conversion Operator
Rough Terrain/Industrial Telescopic Handler – Conversion Operator is for current certified fork truck operators wishing to convert to operate a Rough Terrain Telescopic Handler truck. Documentary evidence of existing certification must be produced as a prerequisite to attending this course. This course enables the successful trained operator to convert their existing forklift qualification to Rough Terrain Telescopic Handler truck.
- Course Duration: Up to 2 days (09:00am to 5:00pm each day)
- Maximum Instructor/Candidate Ratio: 1:3
- RTITB Certification: This then enables the candidate to operate Rough Terrain Telescopic Handler (with authorisation) both the photo ID card and certificate are valid throughout the UK and will be recognised by both employment agencies and perspective employers. The candidate’s name and details are kept on a National Operators Registration Scheme database (NORS) for 3 years.
- WSM IN-HOUSE Certification: This is optional, and if employers prefer, we can supply In-House certificates, only allowing the candidates to operate lift trucks / machinery within the company
Course Content
Successful candidates will gain suitable and sufficient understanding of current relevant legislation, best practice, learn skills and ability in the safe use of Rough Terrain Telescopic Handler in line with current approved methods and manufacturer’s instructions.
The course agenda includes:
- Course introduction and induction
- Current relevant regulations
- Operators Safety Code
- Introduction to machine
- Pre-use inspections
- Controls and instruments
- Components and main types of lift trucks
- Re-fuelling systems
- Coolant, fuel and lubrication systems
- Emergency controls
- Manoeuvring over uneven ground
- Operators safety code
- Handling loaded / unloaded pallets and difficult shaped loads
- Loading and Unloading flat bed lorries and at various heights
- Associated Knowledge, Pre-use Inspection and Practical examinations
To reserve a place on one of our courses for Rough Terrain/Industrial Telescopic Handler – Conversion call or email our office on:
Office: 01387 733731
Email: info@wsmtraining.com
